BXWYD - PRIME-X WHITE,49
- MSDS: BXWYD
- Manufacturer: SINCLAIR PAINT CO
- Product Name: PRIME-X WHITE,49
- National Stock Number: 8010-00N060105
Product Identification
Product ID:PRIME-X WHITE,49
MSDS Date:06/21/1994
FSC:8010
NIIN:00N060105
MSDS Number: BXWYD
Responsible Party
LOS ANGELES, CA 90040
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 213-888-8888
Preparer: J G PRINZ
Cage: 0U0K0
Contractor
Telephone: 213-888-8888
Cage: 0U0K0
Ingredients
0.1 @ 68F
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 2%
OSHA PEL 50 (MFR)
ACGIH TLV: C 50 PPM,VAPOR; 9495
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
PROPIONIC ACID, 2-METHYL-, MONOESTER WITH 2,2,4-
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: <5.0%
OSHA PEL N/K
ACGIH TLV: N/K
0.92 LB/GL (111 G/L) (COATING);
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY CAUSE IRRITATION TO SKIN,
EYES, AND INTESTINAL SYSTEM. INHAL:ADVERSE HEALTH EFFECTS FROM
VAPORS OR SPRAY MISTS IN POORLY VENTILATED AREAS MAY INCLUDE
IRRITATION OF THE MUCOUS MEMBRANES OF TH E NOSE, THROAT, AND
RESPIRATORY TRACT AND SYMPTOMS OF HEADACHE AND NAUSEA.
EYES:INDIRECT CONTACT MAY(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:CAUSE IRRITATION. SKIN:PROLONGED AND
REPEATED CONTACT WITH PRODUCT MAY CAUSE SKIN IRRITATION. SKIN
ABSORPTION:REDNESS, DRYING OF SKIN, OR OTHER SKINS OF IRRITATION OR
CONTACT DERMATITIS. INGE ST:CAN CAUSE GASTROINTESTINAL IRRITATION,
NAUSEA, VOMITING, AND DIARRHEA. CHRONIC: NONE KNOWN.
Medical Cond Aggravated by Exposure:NONE.
First Aid
First Aid:SKIN: CLEANSE THOROUGHLY WITH SOAP AND WATER. REMOVE ALL
CONTAMINATED CLOTHING. EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS
OF WATER FOR AT LEAST 15 MINUTES. TAKE TO A PHYSICIAN FOR MEDICAL
ATTENTION. INHAL: REMOVE TO FRESH AIR. INGEST: DRINK 1 TO 8
GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMITING. CONSULT A
PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY. TREAT
SYMPTOMATICALLY.
Fire Fighting
Lower Limits:0.6%
Upper Limits:15.3%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . THIS IS A WATER-BASED COATING. WILL NOT
SUPPORT COMBUSTION.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HIGH
TEMPERATURES MAY EXPLODE OR BURST DUE TO BUILD UP OF STEAM
PRESSURE.
Accidental Release
Spill Release Procedures:DIKE, CONTAIN, OR ABSORB WITH INERT MATERIAL
(I.E, SAND, VERMICULITE, ETC). TRANSFER TO CONTAINERS FOR RECOVERY
OR DISPOSAL. PREVENT RUNOFF INTO SEWERS, STREAMS, OR OTHER BODIES
OF WATER. SEE INGREDIE NTS AND REACTIVITY DATA SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT EXPOSE TO EXTREMES IN
TEMPERATURES. AVOID EXPOSURE TO HIGH TEMPERATURES. DO NOT ALLOW TO
FREEZE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NOT NORMALLY REQUIRED. IF TLV IS EXCEEDED USE
NIOSH/MSHA APPROVED ORGANIC VAPOR AND MIST PROTECTION.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL AND/OR LOCAL) VENTILATION
TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WEAR IMPERVIOUS CLOTHING.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGRED
Vapor Density:LTR/AIR
Spec Gravity:1.2 (H*2O = 1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETELY
Appearance and Odor:TYPICAL FOR WATER BASED LATEX COATING.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE, CARBON MONOXIDE, ETC.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE,
OR FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.